***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v2.1a
    Build Date/Time     : Mon Mar 4 11:54:43.95 2002

    DrayTek Corp.
    Date: 2002/03/04

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k2021a.all                  --- Lastest released firmware
        \Firmware\v2k2021a.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k2021a.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v2.1a.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k2021a.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20200.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W

    Note: You should restart your web browser after firmware upgrade to get the new
          page of web configurator. 
	
Release Notes:
        1. [ICQ2001b]
           Fixed the compatible problem between ICQ2001b and ICQ2000b, which somes
           functions can not work properly.
         
        2. [VPN]
	   a. Improved the performance of file transfer.
           b. Improved the stabilty of VPN's reconnect while remote site drop suddenly
              during connection.              

        3. [RADIUS Client]
           Fixed the problem that RADIUS Clinet can not work with ISDN rmote dial-in.   
 
        4. [Web Configurator]
           Fixed the problem that in the ">Advanced Setup>VPN and Remote Access Setup>
           LAN-to-LAN Dialer Profile Setup> # >3. Dial-In Setting", if you use a name 
           of 12 characters or longer, the password will appear after the first 12 
           characters of the name.

        5. [WAN IP]
           Fixed the problem that Vigor router can not access the IP address which has same 
           subnet ( Class C ) as its WAN IP.

        6. [ISDN]
           Modified ISDN number input checking. the charater # and * could be typed in 
           all ISDN dial number input fields on WUI.

        7. [DNS]
           Fixed the problem that the Secondary IP address of DNS server does not be used
           if Primary IP address does not response the DNS request or is wrong address.   

***********************************************************************************************

***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v2.1
    Build Date/Time     : Fri Feb 8 10:31:20.95 2002

    DrayTek Corp.
    Date: 2002/02/08

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20210.all                  --- Lastest released firmware
        \Firmware\v2k20210.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k20210.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v2.1.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k20210.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20200.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W

    Note: You should restart your web browser after firmware upgrade to get the new
          page of web configurator. 
	

Release Notes:
	1. [Multi-NAT]
	   a. Added Muiti-NAT function. You can set multiple Wan IPs in web configurator.
              Please click the "WAN IP Alias" button ( is available while "Broadband Access"
              enable ) in ">Quick Setup>Internet Access Setup>Static or dynamic IP".
	   b. DMZ host can be set for each Wan IP in ">Advanced Setup>NAT Setup>DMA Host
              Setup" of web configurator.
  	
        2. [MSN Messenger]
           Support MSN Messenger v4.6 ( v3.6 also can work properly )

        3. [ICQ2001b]
           Spport ICQ2001b ( ICQ2000b also can work properly ), but there is a compatible
           problem between ICQ2001b and ICQ2000b, some functions do not work properly.
           This will be fixed in the next version.
        
        4. [VPN]
           a. Added VPN disable function ( include L2TP, PPTP, IPSec Tunnel ). you can use
              the function to run a VPN server inside your LAN and pass through the NAT.
              setting is ">Advanced Setup>VPN and Remote Access Setup>Remote Access Control 
              Setup>
           b. Added PFS ( Perfect Forward Secrecy ) automatic detection, which fixed the 
              problem that can not establish a VPN connection with Linux server.

        5. [RADIUS]
           Added RADIUS client function. The function can work with PPTP, L2TP remote dial
           in, but ISDN remote dial-in still have problem. ( will be fixed in the next 
           version ). Setting is in ">Advanced Setup>RADIUS Setup" of web configurator.   

	6. [DDNS]
	   a. Supported DDNS service providers including dyndns.org (www.dyndns.org),
              NO-IP.COM Free (www.no-ip.com), DtDNS (www.dtdns.com) and ChangeIP.com 
              (www.changeip.com).
           b. Improved WAN IP update procedures to prevent abusive updates.
           c. Added a new domain name "dyndns.biz" for complying with dyndns.org.

        7. [Web Configurator]
           a. Improved HTTP daemon to speed the file searching.
           b. Moved "Syslog Setup" from ">System Management>Diagnostic Tools" to ">System
              Management"
           c. Added "RADIUS Setup" in ">Advanced Setup"
	     d. Added "VPN and Remote Access Setup" in "Advanced Setup"
           e. Added "Remote Access Control Setup" in ">Advanced Setup>VPN and Remote Access 
              Setup" The setting can enable/disable L2TP VPN, PPTP VPN, IPsec VPN and ISDN
              Remote Dial-In services. 
           f. Removed "Remote Dial-In Access Setup" in ">Quick Setup", the setting is replaced
              by new page ">Advanced Setup>VPN and Remote Access Setup>PPP General Setup".
           g. Moved "IKE/IPSec Setup" from ">Advanced Setup" to ">Advanced Setup>VPN and Remote 
              Access Setup" and changed to "VPN IKE/IPSec Setup"
           h. Moved "Remote Dial-In User Setup" from ">Advanced Setup" to ">Advanced Setup>
              VPN and Remote Access Setup" 
           i. Moved "LAN-to-LAN Dialer Profile Setup" from ">Advanced Setup" to ">Advanced 
              Setup>VPN and Remote Access Setup"
           j. Added new function "Configuration Backup/Restoration" in ">System Management"
              to backup/restore configuration profile.

        8. [NAT]
           a. Portmap checking improvement. Fixed the problem that sometimes router becomes
              very slow after establishing a lot of sessions.
           b. Fixed the problem that port 56415 could be found from Wan port.
           c. Fixed the problem that FXP ( a FTP application ) can not work properly.
 
        9. [Idle Time-out]
           Fixed the problem that idle time-out function does not work properly with VPN
           or ISDN connection.
        
       10. [Telnet]
           Fixed the crash problem that diaplaying the "Online status" page with a 10 second
           refresh rate and running "ip ping xx.xx.xx.xx" in Telnet connection produce the 
           router to reboot.

       11. [PPP]
           Fixed the follwoing problems to improve the PPP's stability:
           a. ISDN PPP Connetion failed problem with some ISPs which may change the 
              authendicating protocol from PAP to CHAP during negotiating statge.
           b. sometimes connetion can not be dropped when remote site does not response
              the Echo_Request packet for a while.

***********************************************************************************************

***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v2.00b
    Build Date/Time     : Thu Jan 17 13:46:31.1 2002

    DrayTek Corp.
    Date: 2002/1/17

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20200.all                  --- Lastest released firmware
        \Firmware\v2k20200.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k20200b.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v2.00b.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k20200b.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20200.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:
	1. fixed the problem that the remote profile can not be sent to the router.
	2. Auto-updrade utility on Mac does not work.

***********************************************************************************************

***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v2.00a
    Build Date/Time     : Tue Dec 11 15:50:44.62 2001

    DrayTek Corp.
    Date: 2001/12/12

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20200.all                  --- Lastest released firmware
        \Firmware\v2k20200.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k20200a.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v2.00a.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k20200a.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20200.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:
	1. [ISDN BOD]
         fixed the malfunction problem.
	2. [VPN]
	   fixed the problem that the on-line status display is not correct.
      3. [PPTP]
	   fixed PPTP server pass-through problem
	4. [Syslog]
	   a. Web Configurator: add a "Syslog Setting" in "Diagnostic Tools" for 
            Syslog setting. Please click "Enable" and enter the host's IP in
            "Syslog output IP" to enable the function.
         b. Currrently, ISDN call information may send syslog's message to host.
            Other message will be added in the next version.     	

***********************************************************************************************

***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v2.00
    Build Date/Time     : Tru Nov 15 18:4:1.28 2001

    DrayTek Corp.
    Date: 2001/11/16

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20200.all                  --- Lastest released firmware
        \Firmware\v2k20200.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k20200.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v2.00.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k20200.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20200.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:

    	1. Support VPN/IPSec function. please refer to the files:
         "VPN_chapter.pdf" for user manual.	
         "VpnReadme.txt" for some application hints. 
    	2. Improve NAT to support some specific applications: ICQ2000, MSN Messenger, 
         NetMeeting. Don't need to set DMZ host any more and can support multi-users in the
         local LAN.
    	3. Network Neighborhood in PC ( Third-party application in Mac ) can work pass-thru
         NAT while a host dial-in via ISDN or VPN.
	           
***********************************************************************************************
***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v1.08
    Build Date/Time     : Fri Oct 19 15:41:38.66 2001

    DrayTek Corp.
    Date: 2001/10/25

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20108.all                  --- Lastest released firmware
        \Firmware\v2k20108.rst                  --- lastest released firmware with default
                                                    settings
        \Firmware\AutoUp\Windows\v2k20108.exe   --- Auto-Upgrade Utility, this utility will
                                                    work after v1.07 released firmware.
        \Firmware\AutoUp\MacOS9\AutoUpgrade_v1.08.hqx   --- Auto-Upgrade Utility for Mac OS9

    << Tools >>>

        \Tools\Windows\RtTools_2.01.exe         --- This Router Tools should work with
                                                    v1.07c firmware or laster.
        \Tools\Windows\VirtualTA\VSetup2k.exe   --- Virtual TA Client 1.06 for Win2000
        \Tools\Windows\VirtualTA\VSetup95.exe   --- Virtual TA Client 1.06 for Win95
        \Tools\Windows\VirtualTA\VSetup98.exe   --- Virtual TA Client 1.06 for Win98
        \Tools\MacOS9\Router_Tools.hqx          --- Router Tools for Mac OS9

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k2_108.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20108.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:

        1. [Web Configurator] 
           a. Added "Clear" and "Clear All" buttons for DDNS, Open Ports and 
              Call Schedule Profiles.
           b. Improved HTTP daemon against attacks by nimda virus.
           c. Removed "None" option of "Link Type" for "Dialing to a Single ISP" and
              "Call Control and PPP/MP Setup".
           d. Improved all password fields could be use '*' and '+' characters. 

        2. [PPPoE]
           Added the DSS over PPPoE function for PPPoE-enabled ADSL access.
 
           Note: DSS stands for Dynamic Service Selection. If the PPPoE-enabled
           ADSL access netowrk supports multiple PPPoE servers for differnet service
           grade, the function can automatically connect your router to correct 
           PPPoE server.

	3. [NAT]
           Fixed a Port Redirection problem.

	4. [ISDN dial-backup]
           Improved the stability of ISDN dial-backup function.

	5. [DDNS]
           Improved DDNS function. If you have any DDNS update problems, you can use
           telnet command "ddns log" to get logs and send back to support center.

	6. [Cable Access]
           Add a "PING to keep alive" function for Cable access users.
	           
***********************************************************************************************
***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v1.07d
    Build Date/Time     : Wed Sep 19 19:49:40.73 2001

    DrayTek Corp.
    Date: 2001/09/19

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20107.all          --- Lastest released firmware
	\Firmware\v2k20107.rst		--- lastest released firmware with default
                                            settings
        \Firmware\v2k2_107d.exe		--- Auto-Upgrade Utility, this utility will work
                                            after v1.07 released firmware.

    This is a patch of v1.07c version. All tools could use v1.07c release level.

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k2_107d.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20107.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:

        1. [Web Configurator]
           a. Remove "None" option of "Link Type" for "Dialing to a Single ISP" and
              "Call Control and PPP/MP Setup".
           b. Add more heximal records for "Diagnostic Tools" > "Triggered Dial-Out
              Packet Header".
           c. Fix a bug that all password fields can not use '*' character.             

        2. [PPPoE for WAN port]
           Add a feature such that users can use "ISP Name" to specify the
           PPPoE-based ADSL provider. For example, when you have two or more
           PPPoE server on the same ADSL line, such as adsl-isp1, adsl-isp2
           and adsl-ips3. If the adsl-isp1 offers PPPoE access service for
           you. You have to type "adsl-isp1" in the "ISP Name" field to 
           specify the PPPoE server. You could click "Internet Access Setup" >
           "PPPoE" to find the "ISP Name" field.

        3. [PPTP for WAN port]
           Fixed a NAT portmap problem using PPTP tunnel mode with ADSL modem.

        4. [DNS Proxy and Wireless LAN]
           Fixed a DNS bug for wireless LAN hosts.

	           
***********************************************************************************************
***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v1.07c
    Build Date/Time     : Thu Sep 6 16:10:44.53 2001

    DrayTek Corp.
    Date: 2001/09/06

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20107.all          --- Lastest released firmware
	\Firmware\v2k20107.rst		--- lastest released firmware with default
                                            settings
        \Firmware\v2k2_107c.exe		--- Auto-Upgrade Utility, this utility will work
                                            after v1.07 released firmware.

    <<< Tools >>>
 
        \Tools\RtTools_2.01.exe		--- This Router Tools should work with v1.07 firmware.
        \Tools\VSetup2k.exe             --- Virtual TA Client 1.06 for Win2000
        \Tools\VSetup95.exe             --- Virtual TA Client 1.06 for Win95
        \Tools\VSetup98.exe             --- Virtual TA Client 1.06 for Win98

Hint for upgrading Firmware:

    Using Auto-Upgrade Utility:

        The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily.
        Before downloading the utility, you have to make sure the current running 
        firmware should be newer than v1.07 (including v1.07).

        1. Download the utility v2k2_107c.exe to your Windows PC.
        2. Make sure the connectivity between your PC and the router.
        3. Double-click the utility, it will find your router and then you should
           push "Send" button to upgrade it.

    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k20107.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Support Models:

        Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W


Release Notes:

        1. [Router Tools and Virtual TA Client] 
           After v1.07 firmware, you should use new Router Tools 2.01 version.

        2. [Virtual TA]
           Fixed Virtual TA can't work on v1.07. 

        3. [PPP-over-V.110]
           Add PPPoV110 indication on the "Online Status" page.

        4. [Always-On for PPPoE/PPTP]
           Add an "Always-On" setting for PPPoE/PPTP dial-up connection.

        5. [Disable PING from the Internet]
           Add a checkbox under Management Setup to enable/disable PING packets from the
           Internet.
   
        6. [Call Scheduler]
           Change the default settings of schedules to be 2000/01/01.

        7. [RIP control for LAN]
           Add a RIP control for LAN interface under "LAN TCP/IP and DHCP Setup" page. If
           your local networks has many subnets want to share the router to the Internet. 
           Please set "RIP Protocol Control" to be "1st subnet".

        8. [Static or Dynamic IP for WAN port]
           Improve Dynamic IP to be compatible with some cable providers.

        9. [PPTP for WAN port]
           If users select PPTP for WAN port, the PPTP server will be 10.0.0.138 and the
           IP address of WAN port will be 10.0.0.150 with netmask 255.0.0.0.

       10. [LAN-to-WAN Throughput]
           Improve the throughput between LAN and WAN interface.

       11. [Wireless LAN]
           Improve web configuration for the part of wireless LAN settings.

       12. [DNS Proxy]
           Improve DNS Proxy for working with RedHat 7.1 Linux.

	           
***********************************************************************************************
***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v1.07
    Build Date/Time     : Tue Jun 26 11:54:2.26 2001

    DrayTek Corp.
    Date: 2001/06/22

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20107.all          --- Lastest released firmware
	\Firmware\v2k20107.rst		--- lastest released firmware with default
                                            settings
        \Firmware\v2k2_107.exe		--- Auto-Upgrade Utility, this utility will work
                                            after v1.07 firmware.

    <<< Tools >>>
 
        \Tools\RtTools_2.01.exe		--- This Router Tools should work with v1.07 firmware.
        \Tools\VSetup2k.exe             --- Virtual TA Client 1.06 for Win2000
        \Tools\VSetup95.exe             --- Virtual TA Client 1.06 for Win95
        \Tools\VSetup98.exe             --- Virtual TA Client 1.06 for Win98

Hint for upgrading Firmware:

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button.
        2. Launch the Firmware Upgrade Utility to select the firmware to send. The utility
           in the Router Tools.  

Release Notes:

        1. [Router Tools and Virtual TA Client] 
           The Router Tools and Virtual TA Client have been updated, you have to uninstall 
           them from your computer first, then install new ones. You will get new release
           in the Tools folder.

           a. The system administrator password has been encrypted between router 
           and Smart Start Wizard.
           b. Fixed a dual-CPUs problem for Virtual TA Clients.

        2. [ISDN interface control]
           Add a ISDN interface control option on Web Configurator to enable or disable 
           ISDN port. You will find the option in "ISDN Setup" of Basic Setup group.

        3. [PPP-over-V.110]
           Support PPP over V.110 protocol for GSM mobile users remote dial-in access.

        4. [MTU setting for WAN]
           Add a Telnet command "wan mtu ..." to set the MTU (Maximum Transmission Unit)
           for the Ethernet WAN interface. You can use this command to configure the
           MTU size for ISDN, PPPoE, PPTP and Static IP modes.

        5. [SNMP Agent]
           Support SNMP (Simple Network Management Protocol) for improving the capabilities
           of network management. You will find SNMP Setup in the "Management Setup" of
           System Management group.

        6. [DDNS function]
           Support DDNS (Dynamic Domain Name System) function. If you are a registered
           user of www.dyndns.org (the provider of DDNS), you can give one or many domain
           names for your active WAN interface using the function.

        7. [Time Client and Call Scheduler]
           Support NTP (Network Time Procotol) client and Call Scheduler function. The
           Call Scheduler funtion provides you to schedule router's WAN connection or 
           LAN-to-LAN connection by your local time. The NTP client setup could be
           found in "Time Setup" of System Management group. The profiles of Call Scheduler
           could be found in "Call Scheduler Setup" of Advanced Setup group. Also you will
           see these profiles could be assigned for Interface Access (ISDN, PPPoE and PPTP)
           and LAN-to-LAN access.

        8. [Online Status]
           Add a System Uptime on the "Online Status" page of web configurator.

	9. [DHCP Server]
           If put zero in the IP Pool Counts, the dynamic IP pool will be disabled. Now you
           can use Telnet command set "srv dhcp fixip" to add or delete static IP pool. This
           static IP pool supports 10 IP addresses.
 
           > srv dhcp fixip ?
           % Valid subcommands are:
           add          clr          del
           
           Under the "srv dhcp fixip" command string, it support three subcommands: "add",
           "clr" and "del".

           > srv dhcp fixip add ?
           % srv dhcp fixip add <IP Addr> <MAC Addr XX-XX-XX-XX-XX-XX> <Host ID>

           The "add" subcommand can add a specific IP address based on host's Ethernet MAC
           address. The Host ID is optional. For example, if you want to specify a IP address
           192.168.1.123 to a specific computer with MAC address 00-50-7F-12-34-56, you can
           try the following command to add.

           > srv dhcp fixip add 192.168.1.123 00-50-7F-12-34-56 vigor

           > srv dhcp fixip del ?
           % srv dhcp fixip del <IP Addr>

           The "del" subcommand can delete a pre-assigned IP address from the static IP pool.
           For example,

           > srv dhcp fixip del 192.168.1.123

           the host 192.168.1.123 will be removed from the static IP pool.

           > srv dhcp fixip clr 

           The "clr" subcommand can clear the static IP pool to default values.

       10. [Verify default Settings]
           A new Telnet command "sys cfg status" can check if the router is working with
           default settings. If yes, you will see the following message.

           > sys cfg status
           Profile version: 0x2    Status: 0 (0x293ab002)

           where Status: 0 (0x293ab002) means the router is default settings. 

       11. [Auto Firmware Upgrade]
           After v1.07 version, Vigor2200 will support Auto Firmware Upgrade Utility to
           update vigor's firmware automatically. Now, the utility just can run on the
           Windows machines.

	           
***********************************************************************************************

***********************************************************************************************
    Release Notes for Vigor2200 Series

    Firmware Version    : v1.06c
    Build Date/Time     : Wed Mar 28 16:36:42.5 2001

    DrayTek Corp.
    Date: 2001/03/28

***********************************************************************************************
Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20106.all          --- Lastest released firmware
	\Firmware\v2k20106.rst		--- lastest released firmware with default
                                            settings
Hint for upgrading Firmware:

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button.
        2. Launch the Firmware Upgrade Utility to select the firmware to send.  

Release Notes:

    1. Support 3V and 5V Flash EPROM.
    2. Fix a WAN port buffer leakage problem.

	           
***********************************************************************************************

***********************************************************************************************
    Release Note for Vigor2200 Series

    Firmware Version    : v1.06b
    Build Date/Time     : Thu Feb 15 15:17:51.43 2001

    DrayTek Corp.
    Date: 2001/02/16

***********************************************************************************************

Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20106.all          --- Lastest released firmware
	\Firmware\v2k20106.rst		--- lastest released firmware with default
                                            settings

Hint for upgrading Firmware:

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button.
        2. Launch the Firmware Upgrade Utility to select the firmware to send.  

Release Notes:

    1. Modify the Ethernet driver to improve router's QoS for internal users to surf 
       the Internet.
    2. Fixed a Typing error in ipnatdmz.sht of Web Configurator.
        "Corbg." ---> "Corp."
    3. ISDN dial-in improvement. Sometimes the dial-in will be failed when
       the remote ISDN TA or router to use ML-PPP to dial into Vigor2200 or Vigor2200X.
    4. Fix a problem that Open Ports can not input 65535 port number.
    5. Fix a Clear button problem under "Advanced Setup" > "IP Filter/Firewall Setup"
       > "Edit Filter Set".

	           
***********************************************************************************************

***********************************************************************************************
    Release Note for Vigor2200 Series

    Firmware Version    : v1.06a
    Build Date/Time     : Thu Jan 11 16:42:46.42 2001

    DrayTek Corp.
    Date: 2001/01/12

***********************************************************************************************

Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20106.all          --- Lastest released firmware
	\Firmware\v2k20106.rst		--- lastest released firmware with default
                                            settings		
    
    <<< Router Tools & Virtual TA Client >>>
 
        \Tools\Windows\RtSetup.exe    	--- Router Tools for all Windwos Platforms 

      	\Tools\Windows\VSetup2k.exe     --- VTA client for Windows 2000

	\Tools\Windows\VSetup95.exe     --- VTA client for Windows 95

	\Tools\Windows\VSetup98.exe     --- VTA client for Windows 98

	\Tools\Mac OS\RtTool.hqx        --- Router Tools for Mac OS

    <<< User Manual >>>
	
	\Manual\v2k2man.pdf		--- Vigor2200's User Manual

Hint for upgrading Firmware:

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button.
        2. Launch the Firmware Upgrade Utility to select the firmware to send.  

Release Notes:

	1. Improve DMZ host function for Mac OS 9.

	2. Add Open Ports function which allow users to open a port range
	   for specific network applications.

	3. Improve NAT engine for FTP protocol pass-thru.

	4. Fix a LAN-to-LAN and ISP access via ISDN simultaneouly problem which
	   when a LAN-to-LAN connection is up the ISP access will be failed.

	5. Improve Web Configurator for more user-friendly with JavaScripts.

	6. Improve Web Configurator for IE 5.5 and Netscape 6.0 browser.

	7. IPSec ESP tunnel mode pass-thru support.

	8. All Vigor2200 series routers (Vigor2200, Vigor2200E and Vigor2200X)
           use the same firmware.

	           
***********************************************************************************************


***********************************************************************************************
    Release Note for Vigor2200 Series

    Firmware Version    : v1.06
    Build Date/Time     : Fri Nov 17 12:16:59.14 2000

    DrayTek Corp.
    Date: 2000/11/17

***********************************************************************************************

Files Description:

    <<< Firmware >>>
 
        \Firmware\v2k20106.all          --- Lastest released firmware		
    
    <<< Router Tools & Virtual TA Client >>>
 
        \Tools\Windows\RtSetup.exe    	--- Router Tools for all Windwos Platforms 

      	\Tools\Windows\VSetup2k.exe     --- VTA client for Windows 2000

	\Tools\Windows\VSetup95.exe     --- VTA client for Windows 95

	\Tools\Windows\VSetup98.exe     --- VTA client for Windows 98

	\Tools\Mac OS\RtTool.hqx        --- Router Tools for Mac OS

Hint for upgrading Firmware:

        1. Uncompress the file v2k20106.zip to be upgradeable firmware v2k20106.all.
        2. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button.
        3. Launch the Firmware Upgrade Utility to select the firmware to send.  

Release Notes:

        1. Most of features are ready as Vigor2000's v1.06 version. Please refer to
           the release note of Vigor2000's v1.06.
         
        2. DMZ Host support.
           The DMZ (De-militized host) can expose a internal host to be public. For
           some special application, such as Microsoft Game --- Age of Empires. You 
           should set the game host to be the DMZ host to play the game with other
           Internet users.

	3. For specific applications configurations are below.

	   Netmeeting:
		Set the Netmeeting host to be the DMZ host.
	   mIRC:
		Set the mIRC host to be the DMZ host.
	   ICQ:
		Set the ICQ host to be the DMZ host.
	   PPTP Pass-Thru:
		No other setting needed.
	   Battlenet:
		1. Warcraft:
		   Create a redirected port UDP:6112 for the game host.
		2. Starcraft:
                   Create a redirected port UDP:6112 for the game host.
		3. Diablo, Dialbo II:
                   Create a redirected port UDP:4000 for the game host.
	   Quake:
                Create a redirected port UDP:27960 for the game host.
           Tribes:
                Set the Tribes host to be the DMZ host.
	   Napter:
		Create a redirected port TCP:6699 for the MP3 sharing host.
           GunTella:
		Create a redirected port TCP:6346 for the MP3 sharing host. Note that
                if you want to share internal media files to outside, you should click
                "Config" on the application menu to update the Local IP to be the WAN
                IP of the Internet connection.

	4. Telnet commands for DHCP client troubeshooting.
	   > ip dhcpc status 	--- View the DHCP client status on WAN interface.
 
	   > ip dhcpc release	--- Release all settings of WAN interface.
 
	   > ip dhcpc renew	--- Renew all settings of WAN interface.
 
	   > log -i -t		--- Display all DHCP messages between Vigor2200 and 
                                    Cable head end system.
	           
***********************************************************************************************

[End of File]
